Programme
1)
Duration
(min)
Energy
(kWh)
Water
(l)
6
40 - 50 0.8 - 0.9 9 - 10
7 60 - 70 0.6 9 - 10
8
10 0.004 3
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the programme duration and the
consumption values.
Information for test institutes
For all the necessary information for test performance. send an email to:
Write down the product number (PNC) that is on the rating plate.
5. OPTIONS
5.1 ProBoost
Activate or deactivate the function
before the start of a programme.
You cannot activate or deactivate
this function while a programme
operates.
This function increases the water pressure
by 40% and gives better washing results
when dishes are very dirty.
5.2 Energy Saver
Activate or deactivate the Energy
Saver function before the start of
a programme. It is not possible to
activate or deactivate this function
while a programme operates.
This function decreases the temperature
in the drying phase. The energy con-
sumption decreases by 25%.
The dishes can be wet at the end of the
programme.
5.3 Multitab function
Activate this function only when you use
the combi detergent tablets.
This function deactivates the flow of rinse
aid and salt. The related indicators are off.
The programme duration can increase.
Activating the multitab function
Activate or deactivate the multitab
function before the start of a pro-
gramme. You cannot activate or
deactivate this function while a
programme operates.
1. Press the on/off button to activate the
appliance.
2.
Make sure that the appliance is in set-
ting mode. Refer to ‘SETTING AND
STARTING A PROGRAMME'.
3.
Press the multitab touchpad, the mul-
titab indicator comes on.
The function stays on until you de-
activate it. Press the multitab
touchpad, the multitab indicator
goes off.
ENGLISH 59
