2. Press .
• The indicators , , and
are off.
• The indicator still flashes.
• The display shows the current
setting:
= the rinse aid empty
notification is activated (factory
setting).
3. Press to change the setting.
= the rinse aid empty notification is
deactivated.
4. Press on/off to confirm the setting.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously and until
the indicators , , , and
flash and the display is blank.
2. Press .
• The indicators , , and
are off.
• The indicator
still flashes.
• The display shows the current
setting:
–
= Acoustic signal off.
– = Acoustic signal on.
3. Press to change the setting.
4. Press on/off to confirm the setting.
6.5 How to set the colour of the
TimeBeam
The appliance must be in programme
selection mode.
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
1. To enter the user mode, press and
hold simultaneously
and until
the indicators
, , , and
flash and the display is blank.
2. Press .
• The indicators , , and
are off.
• The indicator
still flashes.
• The display shows a number and
letter C. Each number refers to a
different colour.
–
= TimeBeam
deactivated.
3. Press repeatedly to change the
colour.
4. Press on/off to confirm the setting.
6.6 AirDry
AirDry improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically
and remains ajar.
ENGLISH 11
