"Half load" button: this option is useful and economical
when only a few dishes need washing reducing the
consumption of water and energy. This option must be linked
to the selection of a washing programme.
Remember to load both baskets.
With the use of this function, the cycle durations change. In
this case, in the digital display, the indication of the running
time of the programme is automatically updated.
With only some programmes this option is available (See
"Washing programmes" chart).
"Extra rinse" button : this option allows to add another
rinse before the last hot rinsing phase. Using this function will
increase the consumption of water of about 3 - 3,5 litres.
With the use of this function, the cycle durations change. In
this case, in the digital display, the indication of the running
time of the programme is automatically updated.
This option is only available with some washing programmes
(see Washing programmes chart).
Indicator lights: have the following meanings:
3 in 1 button: This appliance is equipped with the 3 in 1
function, that allows the use of the "3 in 1" combi detergent
tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Select the 3 in 1 function before the set of a washing
programme.
Once selected this function (button indicator light illuminated) it
will remain active also for the following washing programmes,
to deactivate the function, press the button (button indicator
light off).
With the use of the 3 in 1 function, the cycle durations may
change. In this case, in the digital display, the indication of the
running time of the programme is automatically updated.
NOTE: Once the programme is running, the 3 in 1 function
can NO longer be changed. If you want to exclude the 3 in 1
function you have to cancel the programme setting (see
chapter "Starting a washing programme" - "Cancel a washing
programme in progress") and then deactivate the 3 in 1
function.
In this case you have to set a washing programme (and
eventual options) again.
NOTE: With the use of this function together with programme
Plate Warmer, the drying results may not be optimum.
NOTE: if the drying results are not satisfactory we suggest to
reactivate the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can only
be possible with the 3 in 1 function active.
Activation/deactivation of the rinse aid
dispenser
(The dishwasher must be switched off)
When the rinse aid dispenser has been activated, also the
rinse aid indicator light on the control panel is
automatically activated.
1. Press the On/Off button. The indicator light of the
programme selection button will illuminate and 2 horizontal
lines (--) are visible in the digital display (setting mode).
If the number of a programme (1 - 2 - 3 etc..) is visible in the
display, this means that a washing programme is set.
The programme must be cancelled: press the button
cancel for about 2 seconds. 2 horizontal lines will appear in
the digital display, this means that the set washing
programme has been cancelled and the machine is now in
setting mode.
2. Press simultaneously function buttons 2 and 3, the indicator
lights of the function buttons 1, 2 and 3 start flashing.
3. Press function button 2, the indicator lights of function
buttons 1 and 3 turn off while the indicator light of the button
2 goes on flashing, the digital display indicates the current
setting.
4. To change the setting, press again function button 2, the
digital display indicates the new setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
26
"Half load" option - button activated
available - indicator light on
"Half load" option - button deactivated
not available - indicator light off
"Extra rinse" option - button activated
available - indicator light on
"Extra rinse" option - button deactivated
not available - indicator light off
salt refilling indicator light: illuminates when the salt
has run out
rinse aid refilling indicator light: illuminates when
the rinse aid has run out
end of programme indicator light: illuminates when
the washing programme has ended
Rinse aid dispenser deactivated
Rinse aid dispenser activated
