
Display message and malfunction Possible cause and solution
•
message OPEN THE TAP in the dis-
play
• point-shaped optical signal flashing
The dishwasher does not fill with
water
• The water tap is blocked or furred
with limescale.
Clean the water tap.
• The water tap is turned off.
Turn the water tap on.
• The filter (where present) in the threa-
ded hose fitting at the water inlet valve
is blocked.
Clean the filter in the threaded hose.
• The water inlet hose has not been
correctly laid or it is kinked or
squashed.
Check the water inlet hose connec-
tion.
•
message DRAIN BLOCKED in the
display
• point-shaped optical signal flashing
The dishwasher will not drain
• The sink spigot is blocked.
Clean out the sink spigot.
• The water drain hose has not been
correctly laid or it is kinked or
squashed.
Check the water drain hose connec-
tion.
•
SERVICE CODE
in the display
• point-shaped optical signal flashing
Anti-flood device is activated
• Close the water tap and contact your
local Service Force Centre.
The flashing of the point-shaped op-
tical signal on the floor beneath the
dishwasher door will not be visible if
the appliance has been installed
higher up with a furniture door
mounted flush.
what to do if... electrolux 29