7 Filters
8 Lower spray arm
9 Upper spray arm
Internal light
This appliance has an internal light that
comes on when you open the door and goes
off when the door is closed.
Warning! Visible led radiation, do not
stare into the beam.
Internal light equipped with LED lamp CLASS
2 in accordance with IEC 60825-1: 1993 +
A1:1997 + A2:2001.
Emission wave length: 450 nm
Maximum emitted power: 548 μW
If it is necessary to replace the light, con-
tact your local Service Force Centre.
Optical signal
Once the washing programme starts, a
point-shaped optical signal shows on the
floor beneath the appliance door.
If you install the appliance higher up with a
furniture door mounted flush, the optical sig-
nal can no longer be seen.
Optical signal
Red light fixed Indicates the running of a wash-
ing programme. Comes on
when the programme starts.
Goes off once the programme
has ended.
Red light
flashing
Indicates a malfunction of the
appliance.
Green light
fixed
Indicates the end of the wash-
ing programme.
Control panel
In this fully integrated appliance the con-
trols are located on the top of the door.
When operating with the controls the
door needs to be open.
1. On/off button
2. Scroll buttons (+ -)
3. Display
4. Ok/start button (OK START)
5. Option button (OPTION)
Messages in the display and audible sig-
nals will help you to operate with the ap-
pliance.
Scroll buttons (+ -)
These two buttons have a double function:
• set a washing programme,
• set options.
Ok/Start button
Is necessary to:
• confirm / memorize any option,
• start a washing programme.
Ok/Start button and option button if
pressed simultaneously can:
• cancel a washing programme in pro-
gress,
• cancel an option.
It is also possible to return to the factory set-
ting for the following options:
LANGUAGE
BRIGHTNESS
In setting mode press for about 6 seconds
these 2 buttons simultaneously; the default
language message will appear in the display.
Option button
Press this button to enter a menu of options;
press again to exit from the menu.
How to set the options
1. Press the option button.
2. Press one of the scroll buttons until the
display shows the required option
– DELAY START
– MULTITAB
– SAVE ENERGY
4 electrolux
