If the drying results are not
satisfactory we suggest that you:
1. Fill up the rinse aid dispenser
with rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to posi-
tion 2.
• The activation/deactivation of the
rinse aid is only possible with the
Multitab function active.
Activation/deactivation of the
rinse aid dispenser
1. Press the On/Off button. The
dishwasher must be in setting mode.
2. Simultaneously press and hold func-
tion buttons B and C, until the lights
of function buttons A , B, and C start
flashing.
3.
Press function button B, the lights of
function buttons A and C turn off
while the light of function button B
continues to flash. The digital display
indicates the current setting.
Rinse aid dispenser deac-
tivated
Rinse aid dispenser activa-
ted
4. To change the setting, press button
B again, the digital display shows the
new setting.
5. To memorize the operation, switch
off the dishwasher by pressing the
On/Off button.
If you decide to revert back to the
use of individual detergents we ad-
vise that you:
1. Deactivate the Multitab function.
2. Fill up the salt container and the
rinse aid dispenser again.
3. Adjust the water hardness set-
ting to the highest setting and
perform 1 normal washing pro-
gramme without loading any
dishes.
4. Adjust the water hardness set-
ting according to the hardness of
the water in your area.
5. Adjust the rinse aid dosage.
Select and start a washing programme
Select the washing programme and
delay start with the door slightly
opened. The start of the programme
or the countdown of the delay start
will occur only after the closure of
the door. Until then it is possible to
modify the settings
22 electrolux select and start a washing programme
