Setting electronically
The dishwasher is factory set at
level 5.
1. Press the On/Off button. The
dishwasher must be in setting mode.
2. Simultaneously press and hold func-
tion buttons B and C, until the lights
of function buttons A, B and C start
flashing.
3. Press function button A, the lights of
function buttons B and C turn off
while the light of function button A
continues to flash. The current level
shows on the digital display and a
sequence of intermittent audible sig-
nals are heard.
Examples:
displayed, 5 intermittent audible
signals, pause, etc... = level 5
displayed, 10 intermittent audi-
ble signals, pause, etc... = level 10
4. To change the level, press function
button A. Each time the button is
pressed the level changes. (For the
selection of the new level see the
chart).
Examples: If the current level is 5, by
pressing function button A once,
level 6 is selected.
If the current level is 10, by pressing
function button A once, level 1 is se-
lected.
5. To memorize the operation, switch
off the dishwasher by pressing the
On/Off button.
Use of dishwasher salt
Only use salt specifically designed for
use in dishwashers. All other types of salt
not specifically designed for use in a
dishwasher, especially table salt, will
damage the water softener. Only fill with
salt just before starting one of the com-
plete washing programmes. This will
prevent any grains of salt or salty water,
which may have been spilt, remaining on
the bottom of the machine for any period
of time, which may cause corrosion.
To fill:
1. Open the door, remove the lower
basket and unscrew the cap of the
salt container by turning it anticlock-
wise.
2. Pour 1 litre of water inside the
container (this is necessary only
12 electrolux use of dishwasher salt
