Select and start a washing programme
with delay start
1. Switch on the appliance and select a
washing programme.
2. Press the delay start button again and
again until the display shows the neces-
sary number of hours for the delay start.
3. Close the appliance door.
– The countdown starts automatically.
– When the countdown is completed,
the washing programme starts auto-
matically.
The opening of the appliance door inter-
rupts the countdown. When you close
the door, the countdown continues from
the point of interruption.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
How to cancel a washing programme or
a delay start
If a washing programme or a delay start
has not started, you can change the se-
lection.
When a washing programme or a delay
start are in progress, it is not possible to
change the selection. It is necessary to
cancel the washing programme or the
delay start to make a new selection.
When you cancel the delay start, this au-
tomatically cancels the selected wash-
ing programme. You have to select the
washing programme again.
1. Press and hold the cancel button until the
display shows two horizontal bars.
2. Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
At the end of the washing programme
• The appliance stops automatically.
• The audible signals operate.
1. Open the appliance door.
– The display shows 0.
– The end-of-programme indicator light
is on.
2. Switch off the appliance.
3. For better drying results, keep the door
ajar for some minutes.
• If you do not switch off the appliance,
after three minutes from the end of the
washing programme:
– all indicator lights go off,
– the display shows one horizontal
bar,
– the optical signal goes off.
This helps to decrease energy con-
sumption.
Press one of the buttons (not the on/off
button), the display and the indicator
lights come on again.
The appliance automatically switches off
after 10 minutes from the end of the
washing programme.
Remove the load
• Let the dishes become cold before you re-
move them from the appliance. Hot dishes
are easily damaged.
• First remove the items from the lower bas-
ket, then from the upper basket.
• There can be water on the sides and door
of the appliance. Stainless steel becomes
cool more quickly than the dishes.
electrolux 11
