C
8. Put the filter (A) into position in filter (B).
Turn the filter (A) clockwise until it locks.
To clean the spray arms
Do not remove the spray arms.
If the holes in the spray arms become clog-
ged, remove remaining parts of soil with a
thin pointed object.
To clean the external surfaces
Clean the external surfaces of the appliance
and control panel with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive
cleaning pads or solvents (acetone).
WHAT TO DO IF…
The appliance does not start or stops dur-
ing operation.
First try to find a solution to the problem (re-
fer to the chart). If not, contact the service
centre.
Malfunction Fault code Possible cause Possible solution
The appliance does
not fill with water.
The display shows The water tap is
blocked or is furred
with limescale.
Clean the water tap.
The water pressure is
too low.
Contact your local wa-
ter authority.
The water tap is
closed.
Open the water tap.
The filter in the water
inlet hose is blocked.
Clean the filter.
The connection of the
water inlet hose is not
correct.
Make sure that the
connection is correct.
The water inlet hose is
damaged.
Make sure that the wa-
ter inlet hose has no
damages.
The appliance does
not drain the water.
The display shows There is a blockage in
the sink spigot.
Clean the sink spigot.
The connection of the
water drain hose is not
correct.
Make sure that the
connection is correct.
The water drain hose
is damaged.
Make sure that the wa-
ter drain hose has no
damages.
The anti-flood device
operates.
The display shows Close the water tap
and contact the serv-
ice centre.
The programme does
not start.
The appliance door is
open.
Close the door cor-
rectly.
electrolux 65
