This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
How to activate the Multitab option
1.
Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to ‘SET-
TING AND STARTING A PRO-
GRAMME'.
2.
Press and hold the TimeSaver and
the XtraPower touchpads at the
same time until the Multitab indicator
comes on.
The option stays on until you deactivate it.
Press and hold the TimeSaver and the
XtraPower touchpads at the same time
until the Multitab indicator goes off.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1.
Deactivate the Multitab option.
2. Set the water softener to the highest
level.
3.
Make sure that the salt container and
the rinse aid dispenser are full.
4.
Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6.
Adjust the released quantity of rinse
aid.
5.6 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction or when the
adjustment of the level of the water soft-
ener occurs. It is not possible to deacti-
vate these acoustic signals.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1.
Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to ‘SET-
TING AND STARTING A PRO-
GRAMME’.
2.
Press and hold touchpads (4) and (5)
at the same time until the indicators of
touchpads (3), (4) and (5) flash.
3. Press touchpad (5),
• The indicators of touchpads (3) and
(4) go off.
• The indicator of touchpad (5) contin-
ues to flash.
• The display shows the current set-
ting.
Acoustic signal on
Acoustic signal off
4.
Press touchpad (5) to change the set-
ting.
5.
Deactivate the appliance to confirm
the setting.
6. BEFORE FIRST USE
1.
Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3.
Fill the rinse aid dispenser.
4. Open the water tap.
5.
Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
If you use the combi detergent
tablets, activate the Multitab op-
tion.
ENGLISH 9
