1 On/Off button
2 Digital display
3 Delay start button
4 Programme selection buttons
5 Indicator lights
6 Function buttons
Indicator lights
Salt Comes on when the special salt has run out.
Rinse aid Comes on when the rinse aid has run out.
Multitab Indicates the activation/deactivation of the 'Multi-
tab function' (refer to 'Multitab function').
The digital display
The digital display indicates:
• the level of hardness to which the water
softener is set,
• the approximate remaining time of the run-
ning programme,
• activation/deactivation of the rinse aid dis-
penser ( ONLY with 'Multitab function ac-
tive'),
• the end of a washing programme (the dig-
ital display shows a zero),
• the countdown for the delay start,
• fault codes concerning malfunction of the
dishwasher,
• if the audible signals are activated/deacti-
vated.
Function buttons
The following functions can be set using
these buttons:
• setting the water softener level,
• cancelling a washing programme or a de-
lay start in progress,
• activation/deactivation of the Multitab
function,
• activation/deactivation of the rinse aid dis-
penser when Multitab function is active,
• activation/deactivation of the audible sig-
nals.
Setting mode
Press the On/Off button; if ALL programme
button lights are on the appliance is in setting
mode.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– activating/deactivating the rinse aid,
– activating/deactivating the audible
signals,
the appliance MUST be in setting mode.
Press the On/Off button; if a programme but-
ton light is on the last performed or selected
programme is still set. In this case, to return
to setting mode, the programme has to be
cancelled.
To cancel a set programme or a
programme in progress
Simultaneously press and hold the two func-
tion buttons B and C until all the programme
button lights come on. The programme has
been cancelled and the machine is now in
setting mode.
Audible signals
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing:
– setting of the water softener,
– end of the washing programme,
– intervention of an alarm due to malfunction
of the machine.
Factory setting: audible signals activated
It is possible to deactivate the audible
signals.
Deactivation/activation of the audible
signals
1. Press the On/Off button. The dishwasher
must be in setting mode.
electrolux 5
