Optical signal
The red
light flash-
es.
Indication of a malfunction.
Optical signal
The red
light goes
off.
Indication of the end of a washing
programme.
Control panel
1 On/off button
2 Digital display
3
Delay start button
4 Programme selection buttons
5 Indicator lights
6 Function buttons
Indicator lights
Salt
1)
Comes on when it is necessary to fill the salt container. Refer to
the chapter 'Use of dishwasher salt'.
After you fill the container, the salt indicator light can continue to
stay on for some hours. This does not have an unwanted effect
on the operation of the appliance.
Rinse aid
1)
Comes on when it is necessary to fill the rinse aid. Refer to the
chapter 'Use of rinse aid'.
Multitab Shows the activation of the multitab function. Refer to 'Multitab
function'.
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while
a washing programme operates.
Digital display
The display shows:
• Adjusted level of the water softener.
• Activation/deactivation of the rinse aid dis-
penser (only with multitab function on).
• Remaining time to the end of the pro-
gramme.
• End of a washing programme. The display
shows a zero.
• Number of hours in delay start.
• Fault codes.
• Activation/deactivation of the audible sig-
nals.
Delay start button
Use the delay start button to delay the start
of the washing programme with an interval
between 1 and 19 hours. Refer to the chapter
'Setting and starting a washing programme'.
Programme selection buttons
With these buttons you can select the wash-
ing programme. Press a programme button,
4 electrolux
