Programme Degree of soil
Type of load
Programme phases Options
4)
• All • Prewash
1)
This programme offers the most efficient use of water and energy consumption for crock‐
ery and cutlery with normal soil. This is the standard programme for test institutes.
2)
The appliance senses the degree of soil and the quantity of items in the baskets. It auto‐
matically adjusts the temperature and the quantity of water, the energy consumption and the
programme duration.
3)
With this programme, you can wash a load with fresh soil. It gives good washing results
in a short time.
4)
With this programme, you can quickly rinse off food remains from dishes and prevent
odours forming in the appliance. Do not use detergent with this programme.
5.1 Consumption values
Programme
1)
Water
(l)
Energy
(kWh)
Duration
(min)
11 1.039 227
7 - 12 0.7 - 1.4 45 - 156
14 - 15 1.5 - 1.7 155 - 170
10 0.8 30
5 0.1 14
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
6. SETTINGS
6.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according
to the water hardness.
• Activation or deactivation of the
acoustic signal for the end of a
programme.
• Activation or deactivation of the rinse
aid empty notification.
• Activation or deactivation of AirDry
（空气对流干燥）.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
flashes and the display shows
the programme duration.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
www.electrolux.com8
