6.3 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
to refill rinse aid. If the drying results are
satisfactory while using multi-tablets only,
it is possible to deactivate the notification
for refilling rinse aid. However, for best
drying performance, always use rinse
aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
empty notification
Make sure the appliance is in user mode.
1. Press .
• The indicators
, , and
are off.
• The indicator still flashes.
• The display shows the current
setting:
= the rinse aid empty
notification is activated (factory
setting).
2. Press to change the setting.
= the rinse aid empty notification is
deactivated.
3. Press on/off to confirm the setting.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
Make sure the appliance is in user mode.
1. Press .
• The indicators , , and
are off.
• The indicator
still flashes.
• The display shows the current
setting:
– = Acoustic signal off.
– = Acoustic signal on.
2. Press
to change the setting.
3. Press on/off to confirm the setting.
6.5 How to set the colour of the
TimeBeam （时间投影）
Make sure the appliance is in user mode.
It is possible to change the colour of the
TimeBeam （时间投影） to match the
colour of the kitchen floor. There are
several colours available. The TimeBeam
（时间投影） can also be deactivated.
1. Press .
• The indicators
, , and
are off.
• The indicator
still flashes.
• The display shows a number and
letter C. Each number refers to a
different colour.
–
= TimeBeam （时间投影）
deactivated.
2. Press repeatedly to change the
colour.
3. Press on/off to confirm the setting.
6.6 AirDry （空气对流干燥）
AirDry （空气对流干燥） improves the
drying results with less energy
consumption.
ENGLISH 11
