• The indicator starts to flash.
The number of flashes indicates
the level.
– E.g. 5 flashes + pause + 5
flashes = level 5.
3. Press again and again to
change the setting. Each time you
press the level number
increases. After level 10 you will start
again from level by 1.
4. Press the on/off button to confirm the
setting.
6.3 Use of rinse aid and multi-
tablets together
When you activate the option Multitab, the
rinse aid dispenser no longer releases
rinse aid. However if you are using multi-
tablets and the drying results are not
satisfactory, we suggest to use multi-
tablets and rinse aid together. In this case
you have to activate the rinse aid
dispenser.
The rinse aid dispenser will remain
activated until you modify the setting again
How to activate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
and
until the indicators ,
and start to flash.
2. Press .
• The indicators and a go
off.
• The indicator continues
to flash.
3. Press to change the
setting.
• The indicator comes on.
4. Press the on/off button to confirm the
setting.
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode press and
hold simultaneously and
until the indicators ,
and start to flash.
2. Press .
• The indicators and
go off.
• The indicator continues to flash.
• The indicator is off.
3. Press to change the setting.
• The indicator comes on. The
acoustic signal for the end of
programme is activated.
4. Press the on/off button to confirm the
setting.
ENGLISH
9
