7.2 Setting and starting a
programme
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance a few minutes after:
• You have not closed the door to start
the programme.
• The programme is completed.
Setting mode
For some settings it is necessary that the
appliance is in setting mode.
The appliance is in setting mode when,
after the activation, the indicator and the
duration of the programme ECO are on.
If the control panel does not show this
condition, press and hold, at the same
time, Program and TimeSaver until the
indicator and the duration of the pro-
gramme ECO come on.
Starting a programme without
delay start
1.
Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode.
3. To set a programme, keep the appli-
ance door ajar.
4.
Set a programme. Press Program
again and again until the indicator of
the programme you want to set
comes on. You can also set the appli-
cable options.
• If you want to set the MyFavourite
programme, press and hold Pro-
gram until the indicators that are re-
lated to the MyFavourite programme
and options come on.
The display shows the duration of the
programme.
5.
Close the appliance door to start the
programme.
• The washing phase indicator comes
on.
• The programme duration starts to
decrease with steps of 1 minute.
Starting a programme with delay
start
1. Set the programme.
2. Press Delay again and again until the
display shows the delay time you want
to set (from 1 to 24 hours). The Delay
indicator comes on.
• The countdown starts automatically.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
When you cancel the delay start you have
to set the programme and options again.
Press and hold, at the same time, Pro-
gram and TimeSaver until the indicator
and the duration of the programme ECO
come on.
Cancelling the programme
Press and hold, at the same time, Pro-
gram and TimeSaver until the indicator
and the duration of the programme ECO
come on.
Make sure that there is detergent
in the detergent dispenser before
you start a new programme.
At the end of the programme
The display shows 0:00.
All the segments of the programme bar
are on with fixed light.
1. Press the on/off button or wait for the
Auto Off function to automatically de-
activate the appliance.
2. Close the water tap.
ENGLISH 13
