This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
How to activate the Multitab option
1.
Press the on/off button to activate the
appliance.
2.
Press Option until the Multitab indica-
tor comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1.
Set the water softener to the highest
level.
2.
Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4.
Adjust the water softener to the water
hardness in your area.
5.
Adjust the released quantity of rinse
aid.
5.3 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme
at a time. A new setting cancels
the previous one.
How to save a programme
1. Press the on/off button to activate the
appliance.
2.
Set the programme that you want to
save. You can also set applicable op-
tions together with the programme. It
is not possible to save the option De-
lay.
3. Press and hold, at the same time,
Program and Delay until the indica-
tors of the programme and of the op-
tions start to flash.
How to set the MyFavourite
programme
1. Press and hold Program until the indi-
cators that are related to the MyFa-
vourite programme and options come
on
• The display shows the duration of
the programme.
5.4 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction or when the
adjustment of the level of the water soft-
ener occurs. It is not possible to deacti-
vate these acoustic signals.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1.
Press the on/off button to activate the
appliance.
2.
Press and hold, at the same time,
Program and Option for a few sec-
onds.
3.
Press and hold, at the same time, De-
lay and Start until the programme in-
dicators
, and
start to flash.
4. Press Delay.
•
The programme indicators
and go off.
•
The programme indicator
con-
tinues to flash.
• The display shows the current set-
ting.
Acoustic signal on
Acoustic signal off
5. Press Delay to change the setting.
6.
Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
8
www.electrolux.com
