Indicator lights
End Comes on when a washing programme has
ended. It also has added functions of visual sig-
nalling as:
– the setting of the water softener,
– activation/deactivation of the rinse aid dispens-
er,
– intervention of an alarm due to the malfunction
of the machine.
Multitab function Indicates the activation/deactivation of the 'Multi-
tab function' ( refer to 'Multitab function' ).
Salt
1)
Comes on when the special salt has run out.
Rinse aid
1)
Comes on when the rinse aid has run out.
1) The salt and rinse aid indicator lights are never on while a washing programme is running even if filling
with salt and/or rinse aid is necessary.
Setting mode
Press the On/Off button. If ALL programme
button lights come on and the digital display
shows 3 horizontal bars, the appliance is in
setting mode.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– activating/deactivating the rinse aid,
the appliance MUST be in setting mode.
Press the On/Off button. If a programme but-
ton light comes on and the digital display
shows 1 horizontal bar, the last performed or
selected programme is still set. In this case,
to return to setting mode, the programme
has to be cancelled.
To cancel a set programme or a
programme in progress
Simultaneously press and hold the two Can-
cel buttons ( CANCEL ) (function buttons
B and C ) until all the programme button
lights come on and the digital display shows
3 horizontal bars. The programme has been
cancelled and the machine is now in setting
mode.
First use
Before using your dishwasher for the first
time:
• Ensure that the electrical and water con-
nections comply with the installation in-
structions
• Remove all packaging from inside the ap-
pliance
• Set the water softener level
• Pour 1 litre of water into the salt container
and then fill with dishwasher salt
• Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as: ''3 in 1'', ''4 in 1'', ''5
in 1'' etc... set the Multitab function.
(See ''Multitab function'').
Set the water softener
The dishwasher is equipped with a water
softener designed to remove minerals and
salts from the water supply, which would
have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these minerals and
salts, the harder your water is. Water hard-
ness is measured in equivalent scales, Ger-
man degrees (dH°), French degrees (°TH)
and mmol/l (millimol per litre - international
unit for the hardness of water).
electrolux 5
