When a programme has been selected
the corresponding light comes on.
The digital display shows 3 horizontal
bars.
The programme in progress indicator
light comes on.
Close the dishwasher door, the pro-
gramme starts automatically.
The programme in progress indicator
light remains on.
The digital display shows only 1 horizon-
tal bar and will remain on for all the dura-
tion of the washing programme.
Setting and starting the programme with
delay start
1. After having selected the washing pro-
gramme, press the delay start button until
the digital display shows the flashing
number of hours for the delay start. The
start of the selected washing programme
can be delayed for between 1 and 9
hours.
2. Close the dishwasher door, the count-
down starts automatically. The number in
the display is no longer flashing but fixed
with static light.
3. The countdown will decrease in steps of
1 hour.
4. Opening the door will interrupt the count-
down. Close the door; the countdown will
continue from the point at which it was
interrupted.
5. Once the delay start has elapsed the pro-
gramme will start automatically.
With the delay start function set, the
programme in progress indicator light
is off. Once the countdown of the delay
start has elapsed, the washing pro-
gramme will start automatically and the
programme in progress indicator light
will come on.
The selection of the washing pro-
gramme and delay start can occur also
with the door closed.
When you press a programme button
you have ONLY 3 seconds to select a
different programme or a delay start.
After these 3 seconds, the selected pro-
gramme starts automatically.
Warning! Interrupt or cancel a
washing programme in progress
ONLY if it's absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing programme in
progress
• Open the dishwasher door; the pro-
gramme will stop. Close the door; the pro-
gramme will start from the point at which
it was interrupted.
• Press the On/Off, all lights will go off. Press
the On/Off button again; the programme
will start from the point at which it was in-
terrupted.
Cancel a delay start or a washing
programme in progress
• Simultaneously press and hold the two
function buttons B and C until all the pro-
gramme lights come on and the digital dis-
play shows 3 horizontal bars.
• Cancelling a delay start will also cancel a
washing programme. You have to select
the washing programme again.
• If a new washing programme is to be se-
lected, check that there is detergent in the
detergent dispenser.
End of the washing programme
• The dishwasher will automatically stop and
the programme in progress indicator
light goes off.
•
The End indicator light comes on.
• The light of the programme just ended will
remain on.
• The digital display goes off.
1. Switch off the dishwasher by pressing the
On/Off button.
2. Open the dishwasher door, leave it ajar
and wait a few minutes before removing
the dishes; this way they will be cooler
and the drying will be improved.
electrolux 13
