Fault codes and malfunction Possible cause and solution
• continuous flashing of the light of the
running programme
• 1 flash of the End indicator light
The dishwasher does not fill with
water
• The water tap is blocked or furred
with limescale.
Clean the water tap.
• The water tap is turned off.
Turn the water tap on.
• The filter (where present) in the threa-
ded hose fitting at the water inlet valve
is blocked.
Clean the filter in the threaded hose.
• The water inlet hose has not been
correctly laid or it is bent or squashed.
Check the water inlet hose connec-
tion.
• continuous flashing of the light of the
running programme
• 2 flashes of the End indicator light
The dishwasher will not drain
• The sink spigot is blocked.
Clean out the sink spigot.
• The water drain hose has not been
correctly laid or it is bent or squashed.
Check the water drain hose connec-
tion.
• continuous flashing of the light of the
running programme
• 3 flashes of the End indicator light
Anti-flood device is activated
• Close the water tap and contact your
local Service Force Centre.
what to do if... electrolux 27
