14
Rinse aid
Rinse aid ensures that your dishes gleam and are
free from spots, and that your glasses are clear.
Rinse aid can be added in one of two
ways:
• If you are using dishwasher detergent that already
contains rinse aid, the detergent including the
rinse aid is put into the detergent compartment.
– In this case the mode which dispenses rinse
aid from the supply container must be deacti-
vated to avoid a double dosage.
• If you are using dishwasher detergent and rinse
aid separately, the rinse aid is to be put into the
rinse aid supply container.
– In this case the mode which dispenses rinse
aid from the supply container must be acti-
vated.
– The amount of rinse aid to be dispensed must
be set.
1
Use only branded rinse aid for dishwashers.
Never fill the rinse aid container with any
other substance (e.g. concentrated vinegar)
or dishwasher detergent. This would damage
the appliance.
Activating/deactivating the inflow
of rinse aid
3
Some appliances are equipped with an addi-
tional 3in1 function.
If you are using 3-in-1 dishwashing tablets
and select the 3in1 function together with
the wash programme, the inflow of rinse aid
does not have to be deactivated (see “3in1
function”).
1. Press the ON/OFF button.
The ON/OFF button’s LED will illuminate.
3
If other indicators are also illuminated, this
means that a wash programme has been
activated. The wash programme must be
deselected (RESET):
Press function buttons 2 and 3 simultane-
ously for approx. 2 seconds.
All other indicators will go out.
2. Press function buttons 2 and 3 simultaneously
and keep them pressed.
The LED indicators for function buttons 1 to 3 will
flash.
3. Press function button 2 again.
The LED indicator for function button 2 will flash.
The
L display will indicate the current setting:
4. Pressing function button 2 activates and deacti-
vates the rinse aid dispensing function.
5. If the rinse aid dispensing function has been cor-
rectly set, press the ON/OFF switch.
The setting of the rinse aid dispensing function is
now saved.
The
L indica-
tor is illuminated:
Rinse aid inflow activated
(ex-factory setting)
The
L indica-
tor is not illumi-
nated:
Inflow of rinse aid is deactivated
