Indicator lights
Multitab Comes on when you activate the multitab func-
tion. Refer to the chapter 'Multitab function'.
Salt
1)
Comes on when it is necessary to fill the salt con-
tainer. Refer to the chapter 'Use of dishwasher
salt'.
After you fill the container, the salt indicator light
can continue to stay on for some hours. This does
not have an unwanted effect on the operation of
the appliance.
Rinse aid
1)
Comes on when it is necessary to fill the rinse aid
dispenser. Refer to the chapter 'Use of rinse aid'.
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while
a washing programme operates.
Programme selection buttons
With these buttons you can select the wash-
ing programme. Press a programme button,
the related indicator light comes on. Refer to
'Washing programmes' chapter for more da-
ta about the washing programmes.
Delay start button
Use the delay start button to delay the start
of the washing programme with an interval
between 1 and 9 hours. Refer to the chapter
'Setting and starting a washing programme'.
Digital display
The display shows:
• Number of hours for the delay start.
• If the appliance is in setting mode.
• If a washing programme is set.
Function buttons
Use the function buttons for these opera-
tions:
• To set the water softener. Refer to the
chapter 'Setting the water softener'.
• To cancel the washing programme in pro-
gress or a delay start in progress. Refer to
the chapter 'Setting and starting a washing
programme'.
• To activate/deactivate the multitab func-
tion. Refer to the chapter 'Multitab func-
tion'.
• To deactivate/activate the rinse aid dis-
penser, when multitab function is active.
Refer to the chapter 'Multitab function'.
Setting mode
The appliance must be in setting mode for
these operations:
• To set a washing programme.
• To set the water softener level.
• To deactivate/activate the rinse aid dis-
penser.
Press the on/off button. The appliance is in
setting mode when:
– All the programme indicator lights come on
and the digital display shows three hori-
zontal bars.
Press the on/off button. The appliance is not
in setting mode when:
– Only one programme indicator light comes
on and the digital display shows one hori-
zontal bar.
– A washing programme is set. It is neces-
sary to cancel the programme to go back
to the setting mode. Refer to the chapter
'Setting and starting a washing pro-
gramme'.
Use of the appliance
Refer to the following instructions for each
step of procedure:
1. Make a check if the water softener level
is correct for the water hardness in your
area. If necessary set the water softener.
electrolux 5
