We recommend to always
use rinse aid for better
drying performance, also in
combination with multi-
tablets containing rinsing
agent.
9. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in
programme selection mode.
• If the display shows the salt
refilling message, fill the salt
container.
• If the rinse aid empty message is
shown, fill the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree of
soil.
9.1 Using the detergent
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1. Press the release button (A) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (B).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
9.2 Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
Starting a programme
1. Press the on/off button to activate the
appliance.
2. Close the appliance door.
3. Select applicable options if desired.
Once the options are set, go back to
the programme list.
4. Select a programme. The
programme ECO is always the
default programme.
If the programme is applicable to the
option TimeSaver, you have to confirm
Fast or Normal.
5. Press the OK key, the programme
starts.
When the programme starts, the display
shows:
• The duration of the programme that
decreases with steps of 1 minute.
• The symbol of the running
programme.
• In the lower part of the display a
programme bar is visible. The middle
ENGLISH 15
