7.2 Setting and starting a
program
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance a few minutes after:
• You have not closed the door.
• You have not pressed Start to start the
program.
• The program is completed.
Setting mode
For some settings it is necessary that the
appliance is in setting mode.
The appliance is in setting mode when,
after the activation, the indicator and the
duration of program ECO come on.
If the control panel does not show this
condition, press Reset.
Starting a program without delay
start
1. Open the water tap.
2.
Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode.
3.
Close the appliance door.
4. Set a program. Press Program again
and again until the indicator of the pro-
gram you want to set comes on. You
can also set the applicable options.
• If you want to set the MyFavourite
program, press MyFavourite. The
indicators that are related to the My-
Favourite program and options
come on.
The display shows the duration of the
program.
5. Press Start to start the program.
• When the program starts, only the
program duration and the program
bar are visible. If you want to see
which program and options are set,
press any touchpad (not Reset). The
set program and options are visible
for a few seconds.
• The program duration starts to de-
crease with steps of 1 minute.
Starting a program with delay
start
1. Set the program.
2. Press Delay again and again until the
display shows the delay time you want
to set (from 1 to 24 hours). The Delay
indicator comes on. The program indi-
cator, the program bar and the option
indicators are no longer visible.
3.
Press Start to start the countdown.
• If you want to see which program
and options are set, press any
touchpad (not Reset). The set pro-
gram and options are visible for a
few seconds.
When the countdown is completed, the
program starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
When you cancel the delay start you have
to set the program and options again.
1. Press Reset. The indicator and the
duration of the program ECO come
on.
Cancelling the program
Press Reset. The indicator and the dura-
tion of the program ECO come on.
Make sure that there is detergent
in the detergent dispenser before
you start a new program.
At the end of the program
The display shows 0:00.
• The program indicator goes off.
• All the segments of the program bar are
on with fixed light.
1. Press the on/off button or wait for the
Auto Off function to automatically de-
activate the appliance.
2. Close the water tap.
ENGLISH 13
