Pro-
gramme
1)
Degree of
soil
Type of load
Programme
phases
Dura-
tion
(min)
Energy
(kWh)
Water
(l)
3)
Fresh soil
Crockery and
cutlery
Wash 60 °C
Rinse
30 1.0 11
4)
Normal soil
Crockery and
cutlery
Prewash
Wash 50 °C
Rinses
Dry
195 1.03 11.2
5)
All Prewash 14 0.1 4
1)
The pressure and the temperature of the water , the variations of the mains supply, the
options and the quantity of dishes can change the programme duration and the
consumption values.
2)
The appliance senses the degree of soil and the quantity of items in the baskets. It
automatically adjusts the temperature and quantity of the water, the energy consumption
and the programme duration.
3)
With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.
4)
With this programme you have the most efficient use of water and energy consumption for
crockery and cutlery with normal soil. (This is the standard programme for test institutes).
5)
Use this programme to quickly rinse the dishes. This prevents the remaining food to bond
on the dishes and bad odours to come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
Write down the product number (PNC) that is on the rating plate.
5. OPTIONS
Activate or deactivate the Multitab
option before the start of a pro-
gramme. You cannot activate or
deactivate the option while a pro-
gramme operates.
5.1 Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse
aid and salt. The salt and rinse aid indica-
tors stay off.
The programme duration can increase.
1. Press and hold at the same time but-
tons
and until the Mul-
titab indicator comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Set the water softener to the highest
level.
2.
Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the water
hardness in your area.
5.
Adjust the released quantity of rinse
aid.
6
www.electrolux.com
