Problem Possible solution
Make sure that there is not a damaged fuse in
the fuse box.
The programme does not start. Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or
wait for the end of the countdown.
The appliance does not fill with
water.
Make sure that the water tap is open.
Make sure that the pressure of the water sup-
ply is not too low. For this information, con-
tact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not
clogged.
Make sure that the inlet hose has no kinks or
bends.
The appliance does not drain the
water.
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or
bends.
The anti-flood device is on. Close the water tap and contact the Service.
After the checks are completed, activate
the appliance. The programme continues
from the point of interruption.
If the problem occurs again, contact the
Service.
If the display shows other alarm codes,
contact the Service.
10.1 The washing results and drying results are not satisfactory
Problem Possible cause Possible solution
The dishes are not
clean.
The filters are clogged. Clean the filters.
The filters are not correctly
assembled and installed.
Make sure that the filters are
correctly assembled and in-
stalled.
The spray arms are clog-
ged.
Remove remaining soil with a
thin pointed object.
The programme was not
applicable for the type of
load and soil.
Make sure that the pro-
gramme is applicable for the
type of load and soil.
Incorrect position of the
items in the baskets. Water
could not wash all items.
Make sure that the position
of the items in the baskets is
correct and that the water
can easily wash all items.
ENGLISH 13
