daily use electrolux 23
If you decide to turn back to the
use of standard detergent system
we advise that you:
1. Deactivate the 3 in 1 function.
2. Fill up the salt container and the
rinse aid dispenser again.
3. Adjust the water hardness setting
to the highest setting and perform
1 normal washing programme
without loading any dishes.
4. Adjust the water hardness setting
according to the hardness of the
water in your area.
5. Adjust the rinse aid dosage.
Activation/deactivation of the 3 in 1
function
1. Press the On/Off button. The
dishwasher must be in setting
mode.
2. Press simultaneously the two
buttons positioned over the writing
3 in 1, until the "3 in 1 function
"indicator light illuminates. This
means that the function is active.
To deactivate the function press
the same buttons again until the
indicator light corresponding to the
"3 in 1" symbol turns off.
3. To memorise the operation, switch
off the dishwasher by pressing the
On/Off button.
"3 in 1 function"
This appliance is equipped with the "3
in 1 function", that allows the use of
the "3 in 1" combi detergent tablets.
These products are detergents with a
combined cleaning, rinsing and salt
functions. They can also contain other
different agents depending on which
kind of tablets you choose ("3 in 1", "4
in 1", "5 in 1" etc...)
Check whether these detergents are
suitable for your water hardness. See
the manufacturers instructions.
This function can be selected with all
washing programmes.
With the selection of this function the
inflow of rinse aid and salt from each
respective supply container is
automatically deactivated and also the
indicator lights for salt and rinse aid
are deactivated.
Select the "3 in 1 function" before the
start of a washing programme.
Once this function is selected
(indicator light illuminated) it will
remain active also for the following
washing programmes.
With the use of the "3 in 1 function",
the cycle durations may change. In
this case, in the digital display, the
indication of the running time of the
programme is automatically updated.
Once the programme is running, the
"3 in 1 function" can NO longer be
changed. If you want to exclude the
"3 in 1 function" you have to cancel
the programme setting and then
deactivate the "3 in 1 function".
In this case you have to set a
washing programme (and desired
options) again.
