The drain hose can face either to the
right or left of the dishwasher
Ensure the hose is not bent or squashed
as this could prevent or slow down the
discharge of water.
The sink plug must not be in place when
the machine is draining as this could
cause the water to syphon back into the
machine.
If you use a drain hose extension it must
be no longer than 2 metres and its inter-
nal diameter must be no smaller than the
diameter of the hose provided.
Likewise the internal diameter of the
couplings used for connections to the
waste outlet must be no smaller than the
diameter of the hose provided.
When connecting the drain hose to an
under sink trap spigot, the entire plas-
tic membrane (A) must be re-
moved. Failure to remove all the mem-
brane will result in food particles building
up over time eventually blocking the
dishwasher drain hose spigot
Our appliances are supplied with a
security device to protect against
the return of dirty water back into
the machine. If the spigot of your
sink has a "no return valve" incor-
porated this can prevent the correct
draining of your dishwasher. We
therefore advise you to remove it.
Electrical connection
Safety standards require the appli-
ance to be earthed.
Prior to using the appliance for the
first time, ensure that the rated volt-
age and type of supply on the rating
plate match that of the supply where
the appliance is to be installed. The
34 electrolux electrical connection
