Water hardness
Adjusting the water hard-
ness setting
Use of salt
°dH °TH mmol/l manually electronical-
ly
51 - 70 91 - 125 9,1 - 12,5 2 level 10 yes
43 - 50 76 - 90 7,6 - 8,9 2 level 9 yes
37 - 42 65 - 75 6,51 - 7,5 2 level 8 yes
29 - 36 51 - 64 5,1 - 6,4 2 level 7 yes
23 - 28 40 - 50 4,0 - 5,0 2 level 6 yes
19 - 22 33 - 39 3,3 - 3,9 2 level 5 yes
15 - 18 26 - 32 2,61 - 3,2 1 level 4 yes
11 - 14 19 - 25 1,9 - 2,5 1 level 3 yes
4 - 10 7 - 18 0,71 - 1,8 1 level 2 yes
< 4 < 7 < 0,7 1 level 1 no
Setting manually
The dishwasher is factory set at position
2.
1. Open the dishwasher door.
2. Remove the lower basket from the dish-
washer.
3. Turn the water hardness dial to position
1 or 2 (see table).
4. Replace the lower basket.
Setting electronically
The dishwasher is factory set at level 5.
1. Press the On/Off button. The dishwasher
must be in setting mode.
2. Press simultaneously and keep pressed
buttons B and C, until the lights of but-
tons A, B and C start flashing.
3.
Press button A, the lights of buttons B
and C turn off while the light of button A
goes on flashing. At the same time the
End of programme indicator light starts
flashing. The current level is indicated by
the number of flashes of the End of pro-
gramme indicator light, (see chart) and a
pause of few seconds.
Examples:
5 flashes, pause, 5 flashes, pause = level
5
4. To change the level, press button A. Each
time the button is pressed the level
changes. (For the selection of the new
level see the chart).
Examples: if the current level is 5, by
pressing button A once, level 6 is selec-
ted. if the current level is 10, by pressing
button A once, level 1 is selected.
5. To memorise the operation, switch off the
dishwasher by pressing the On/Off but-
ton.
Filling with dishwasher salt
Warning!
Only use salt specifically designed for use in
dishwashers. All other types of salt not spe-
cifically designed for use in a dishwasher, es-
pecially table salt, will damage the water soft-
ener. Only fill with salt just before starting one
of the complete washing programmes. This
will prevent any grains of salt or salty water,
which may have been spilt, remaining on the
bottom of the machine for any period of time,
which may cause corrosion.
To fill:
6 electrolux
