USE OF RINSE AID
Caution! Only use branded rinse aid
for dishwashers.
Do not fill the rinse aid dispenser with
other products (e.g. dishwasher clean-
ing agent, liquid detergent). This can
cause damage to the appliance.
Rinse aid makes it possible to dry the
dishes without streaks and stains.
Rinse aid is automatically added during
the last rinsing phase.
Do these steps to fill the rinse aid dispens-
er:
1. Turn the cap anticlockwise to open the
rinse aid dispenser.
2. Fill the rinse aid dispenser with rinse
aid. The mark 'max.' shows the maxi-
mum level.
M
A
X
1
2
3
4
+
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam during the subsequent washing
programme.
4. Replace and turn the cap clockwise to
close the rinse aid dispenser.
Adjusting the rinse aid dosage
The rinse aid is set at the factory at position
3.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).
M
A
X
1
2
3
4
+
1. Turn the rinse aid dial to increase or de-
crease the dosage.
– Increase the dosage if there are wa-
ter droplets or limescale on the
dishes.
– Decrease the dosage if there are
streaks, whitish stains or bluish layers
on the dishes.
electrolux 7
