ELECTRONIC ADJUSTMENT
1. Press and hold the start/cancel button.
2. Turn the programme knob clockwise
until the programme marker agrees
with the first available washing pro-
gramme on the control panel.
3. Release the start/cancel button when
the on/off and the start/cancel indicator
lights start to flash.
4. At the same time, the end-of-pro-
gramme indicator light starts to flash.
The number of flashes shows the cur-
rent adjustment.
Example: 5 flashes / pause / 5 flashes
= level 5.
5. Press the start/cancel button to change
the adjustment. Each time you press
the start/cancel button, the adjustment
goes to the subsequent level.
6. Switch off the appliance to keep the
operation.
If the water softener is set electronically
to the level 1, the salt indicator light
stays off.
USE OF DISHWASHER SALT
How to fill the salt container:
1. Turn the cap counterclockwise and
open the salt container.
2. Fill the salt container with 1 litre of wa-
ter (only for the first time you fill with
salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from
the salt container when you fill it with
salt.
electrolux 7
