Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Technical specifications
Installation instruction
18
DIMENSIONS Width 59.6 cm
Height with worktop 84.7 cm
Height without worktop 81.7 cm
Max depth 61 cm
Max depth with open door 115.2 cm
ELECTRICAL CONNECTION Voltage 230 V - 50 Hz
MOTOR RATING DURING WASH 200 W
POWER OF HEATING ELEMENT 2100 W
OVERALL POWER 2300 W
WATER SUPPLY PRESSURE Minimum 50 kPa (0.5 bar)
Maximum 800 kPa (8 bar)
CAPACITY 12 place settings
CONSUMPTION Water 19 l
Electricity 1.4 kW/h
Electrical connection
Before plugging the appliance into the wall socket, make
sure that:
1. The mains voltage corresponds to the voltage
given in the “Technical specifications”.
2. The meter, fuses, mains power supply and wall
socket can all take the maximum load required.
Make sure that the socket and plug are
compatible without having to use any type of
adaptor. If necessary, have the domestic wiring
system socket replaced.
Safety standards require the appliance to be
earthed.
The manufacture accepts no liability for failure to
observe the above safety precautions.
