Stains and dry water drops on
glasses and dishes
• The released quantity of rinse aid is not
sufficient. Adjust the rinse aid selector
to a higher position.
• The quality of the detergent can be the
cause.
Dishes are wet
• The programme is without a drying
phase or with a low temperature drying
phase.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the
cause.
Refer to ‘HINTS AND TIPS’ for
other possible causes.
11. TECHNICAL INFORMATION
Dimensions Width / Height / Depth (mm) 545 / 447 / 515
Electrical connection Refer to the rating plate.
Voltage 220 - 240 V
Frequency 50 Hz
Water supply pressure Min. / max. (bar / MPa) (0.8 / 0.08 ) / (10 / 1.0 )
Water supply
1)
Cold water or hot water
2)
max. 60 °C
Capacity Place settings 6
Power consumption Left-on mode 0.99 W
Off-mode 0.10 W
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
2)
If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.
12.
CH
GARANTIE, GARANZIA, GUARANTEE
12.1 Kundendienst, service-clientèle, Servizio clienti, Customer
Service Centres
Servicestellen Points de Serv-
ice
Servizio dopo
vendita
Point of
Service
5506 Mägenwil/Zürich In-
dustriestrasse 10
3018 Bern Mor-
genstrasse 131
1028 Préver-
enges Le Trési 6
6928 Manno
Via Violino 11
58
www.electrolux.com
