Dil ID: 9
Dil Adı: germany
Dil Kodu: de1tayfun Produkte der Marke Electrolux Rex
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



5.5 Apertura Automatica Porta
This option gives good drying results with
less energy consumption.
This option is automatically activated
when you set the programme P1. The
Apertura Automatica Porta indicator
comes on.
It is not possible to set this option with
other programmes.
While the drying phase operates, a de-
vice opens the appliance door and
keeps it ajar.
At the end of the programme, the de-
vice and the appliance door retract. The
appliance automatically deactivates.
CAUTION!
Do not try to close the appliance
door while the device keeps the
door ajar. This can cause damage
to the appliance.
If you want to deactivate the Apertura Au-
tomatica Porta option, press Apertura
Automatica Porta. The related indicator
goes off.
In this condition, the energy consumption
of the programme increases.
5.6 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction or when the
adjustment of the level of the water soft-
ener occurs. It is not possible to deacti-
vate these acoustic signals.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to “Set-
ting and starting a programme”.
2. Press and hold, at the same time,
Programmi and MyFavourite until
the indicators of Delay, Programmi
and MyFavourite start to flash.
3.
Press MyFavourite.
The indicators of Delay and Pro-
grammi go off.
The indicator of MyFavourite contin-
ues to flash.
The display shows the current set-
ting.
Acoustic signal on.
Acoustic signal off.
4.
Press MyFavourite to change the
setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
6. BEFORE FIRST USE
1.
Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
ENGLISH 9