3. Use the Arrow buttons to display your language and select it by pressing Select .
4. You can now:
Save your settings and return to the Main menu by pressing the button.
Exit without saving your settings by pressing the Cancel button . A prompt appears asking for confirmation. Press
again to confirm. If you decide to save your changes, highlight Yes using the Arrow buttons and then press
Select .
Resetting the Language
If you need to change the default language used on the operator panel, repeat the procedure in "Setting the
Language" described above.
Resetting Factory Defaults
If you need to restore the factory default settings, in the Main menu press and hold down the Menu button
for at least 10 seconds, until a message appears confirming the successful reset operation: "Restoring
factory default settings".
Using the Operator Panel
The operator panel buttons allow you to scan, copy and customise documents. The printer is on when the
power button
is illuminated.
Number Part
Description
1
Liquid Crystal Display
(LCD)
Displays scanning, copying and printing options as well as status
and error messages.
