PCL Settings
Purpose:
To change the printer settings that only affect jobs using the PCL emulation printer language.
Values:
Secure Settings
Panel Lock
Purpose:
To set whether to lock Admin Menu with a password, and to set or change the password.
Set the password of the Dell Printer Configuration Web Tool from Set Password in Print Server Settings.
Values:
Sets the volume of the tone that is emitted when a copy job is complete, or disables the tone.
Sets the volume of the tone that is emitted when a job other than a copy job is complete, or disables the tone.
Sets the volume of the tone that is emitted when a job ends abnormally, or disables the tone.
Sets the volume of the tone that is emitted when a problem occurs, or disables the tone.
Sets the volume of the tone that is emitted when the printer runs out of paper, or disables the tone.
Sets the volume of the tone that is emitted when the toner or some other consumable is low, or disables the tone.
Sets the volume of the tone that is emitted 5 seconds before the printer performs auto clear, or disables the tone.
Sets the volume of the tone that is emitted when the operator panel screen returns to the default setting by scrolling the loop
menu, or disables the tone.
Sets the volume of all the alert tones, or disables all the tones.
Specifies time (in seconds) the printer should wait for data to arrive from the computer. The print job is cancelled if the time-out
time is exceeded.
Sets the language to be used on the operator panel.
Specifies whether or not to automatically print a job history report after every 20 jobs.
Specifies where to print the user ID on the output paper.
Specifies whether the printer outputs PDL data (which is not supported by the printer) as text when the printer receives it.
Specifies whether to allocate RAM for the file system for the Secure Print and Store Print features.
This item is only available when the 256 MB optional memory card is installed.
Specifies whether or not to use another size paper when the paper that is loaded in the specified tray does not match the paper
size settings for the current job.
Specifies the measurement unit to be used on the operator panel screen as either mm or inches.
Specifies the paper size.
Specifies the length of custom size paper. The available range is from 127 mm (5.0 in.) to 355 mm (14.0 in.).
Specifies the width of custom size paper. The available range is from 77 mm (3.0 in.) to 215 mm (8.5 in.).
Specifies how text and graphics are oriented on the page.
Specifies the font from the list of registered fonts.
Specifies a symbol set for the specified font.
Specifies the font size for scalable typographic fonts.
Specifies the font pitch for scalable monospaced fonts.
Specifies the number of characters in a line.
Sets the number of copies to print.
Specifies whether to help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in
hexadecimal and character representation. Control codes are not executed.
Specifies whether to print in the draft mode.
Specifies how to handle line terminations.
Specifies the print color mode as Color or Black. This setting is used for print jobs without a specified color print mode.
Sets whether to lock Admin Menu with a password.
Sets a password that is required to access Admin Menu.
Enter the new password again to confirm.
