Produkte der Marke Dell

3. Pull the release lever straight up until the microprocessor is released.

4. Remove the microprocessor from the socket.

If you are replacing the microprocessor, leave the release lever extended in the release position so that the socket is ready for the new microprocessor

and go to "Installing the Microprocessor."

If you are removing a second microprocessor and not installing another one, remove the VRM and then continue with step 9.

5. Replace the airflow shroud (for the Dell Precision 650 computer, see "Microprocessor Airflow Shroud — DellPrecision™650Computer" or for the Dell

Precision 450 computer, see "Microprocessor Airflow Shroud — DellPrecision™450Computer").

6. Close the computer cover.

7. Connect your computer and devices to electrical outlets, and turn them on.

Back to Contents Page



lever

NOTICE: Be careful not to bend any of the pins when you remove the microprocessor from the socket. Bending the pins can permanently damage the

microprocessor.

release lever

microprocessor

socket

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.