
version 1.0 15
DELL™ OPTIPLEX™ 755 TECHNICAL GUIDE
15
MT DT SFF USFF
PCI Slot(s) Dimensions: (HxL)
2 2 1
Height i n c h e s /c e n t i m e t e r s
4.376 / 11.115 2.731 / 6.89
Length i n c h e s /c e n t i m e t e r s
6.6 / 16.765* 6.6 / 16.765
PCIe x16 Slot Dimensions: (HxL)
1 1 1
Height i n c h e s /c e n t i m e t e r s
4.376 / 11.115 2.731 / 6.89
Length i n c h e s /c e n t i m e t e r s
6.6 / 16.765* 6.6 / 16.765
PCIe x1 Slot Dimensions: (HxL)
1
Height i n c h e s /c e n t i m e t e r s
4.376 / 11.115
Length i n c h e s /c e n t i m e t e r s
6.6 / 16.765
Combo Full Height Riser with 1 PCI and
1 PCIe connector (HxL)
1 /1
Height i n c h e s /c e n t i m e t e r s
4.376 / 11.115
Length i n c h e s /c e n t i m e t e r s
6.9 / 17.53**
Dual Full Height Riser with 2 PCI connectors
(HxL)
2
Height i n c h e s /c e n t i m e t e r s
4.376 / 11.115
Length i n c h e s /c e n t i m e t e r s
6.9 / 17.53**
systEM boarD connEctor MaxiMuM aLLowabLE DiMEnsions
* Card length can be longer than standard Half-Length Card but cannot be a Full-Length Card.
** 6.9/17.53 in/cm is longer than the standard Half-Length Card. Risers replace 1 PCl slot and 1 PCle slot on DT system board.
MT DT SFF USFF
Integrated Intel
®
Graphics Media
Accelerator 3100*
Integrated on system board
Enhanced Graphic/Video Options
DVI (Digital)
Optional full height or low prole Add-2 card
Native DVI
Connector
graphics/viDEo controLLEr
MT supports full height card, DT supports low prole card or full height card with optional riser. SFF supports low prole card.
* Signicant memory may be used to support graphics, depending on system memory size and other factors.