DOOR REVERSAL INSTRUCTIONS
Tilt the unit slightly towards the rear and prop it securely. Two1
people are required to tilt the unit during the door reversal
process.
On the top of the unit, remove the 4 screw covers, then undo2
the screws underneath.
Lift the top cover away from the fridge.3
Remove the three screws. Then remove the upper hinge that4
holds the door in place. Lift the door and place it on a padded
surface to prevent it from scratching.
Remove the bolt with a screwdriver and flip the hinge bracket.5
Then re-attac h the bolt to the hinge bracket.
Take off the middle hinge by removing the screws. Then lift6
the lower door and place it on a padded surface to prevent it
from scratching.
Move the hinge hole covers on the panel between the fridge7
and freezer from the left side to the right side.
Remove the adjustable feet from both sides. Remove the8
screws and the bottom hinge.
If you find the direction of opening the door on your appliance•
inconvenient, you can change it. Holes on the opposite side
have already been prepared in the factory.
6
