2
Connecting The DWL-G800AP Wireless
Range Extender To Your Network
A. First, connect the power adapter to the receptor at the back panel of the
DWL-G800AP and then plug the other end of the power adapter to a wall
outlet or power strip. The Power LED will turn ON to indicate proper opera-
tion.
B. Using a Ethernet cable, insert one end of the cable to the LAN port on the
back panel of the DWL-G800AP and the other end of the cable to a switch/
router. Note: You also have the option of connecting the DWL-G800AP
directly to the computer that will be used for configuration. The Link LED light
will illuminate to indicate a proper Ethernet connection. (Note:The LAN Port
on the DWL-G800AP is Auto MDI/MDI-X meaning you can use a
straight-through or crossover cable to the LAN Port.)
C. Computers with 802.11g wireless adapters such as the DWL-G650 AirPlus
Xtreme G Wireless Cardbus Adapter and the DWL-G520 AirPlus Xtreme G
Wireless PCI Adapter can connect to the DWL-G800AP. By default, the
DWL-G800AP is set in repeater mode and will extend the wireless signal
from a wireless gateway or access point.
A. Receptor for
Power Adapter
C. Antenna
Used to wirelessly
connect to 802.11b/g
networks.
B. LAN Port
This is the connection for
Ethernet cables to your
Ethernet-enabled device.
TM
TM
