4
GETTING STARTED
See More
To get started driving your Volt, review the basic information in this guide along
with your Owner Manual. To view informative online videos about Volt operations,
scan the QR code in this guide with your smart phone. To scan a code:
1. Use the QR Code Reader on your smart phone or download a free reader to
your smart phone from your phone’s app store.
2. Start the reader.
3. Hold the phone over the code and shoot. Some phones will recognize the code
automatically.
Remote Keyless Entry (RKE)
The RKE transmitter performs several remote functions and must be in the vehicle to
operate the Volt.
Key Release
Press the top button to extend the key,
which can be used to unlock the driver’s
door.
Unlock
Press to unlock the driver’s door or
all doors.
Lock
Press to lock all doors.
Charge Port Door
Press to open the charge port door.
Remote Start
Press the Lock button and then press
and hold the button to start the vehicle
and condition the passenger cabin
temp erature from outside. The heating or
air conditioning system and rear window
defogger (if needed) will turn on. Depend -
ing on conditions, the engine may start.
After entering the vehicle, press the brake
pedal and then press the POWER
button before driving.
Note:
– Press and hold the Remote Start button
again to cancel a remote start.
– Only two remote starts are allowed
between ignition cycles.
– It’s RECOMMENDED to use this
feature when the vehicle is plugged in
to allow energy from the wall outlet to
assist in getting the cabin to a comfort-
able temperature and to leave more
battery energy for driving.
Panic Alarm
Press and release to locate the vehicle.
Press and hold for three seconds to sound
the panic alarm.
See Keys, Doors and Windows in your Owner Manual.
Getting
Started
Basics
Sample
