7
Silverware should be placed in the silverware basket with handles at the bottom: If the rack has side baskets, the spoon should
be loaded individually into the appropriate slots, Especially long utensils should be placed in the horizontal position at the
front of the upper rack.
Do not let any item extend throughbottom.
Teaspoons
4
Soup spoons
2
Forks
1
Serving fork
8
Serving spoon
6
Knife
5
3
Dessert spoons
7
Gravy ladle
Make sure that the plug for the appliance is inserted into the wall socket.
Make sure that the water supply is turned on to full pressure.
Load the dishwasher(see the section entitled, " Loading the Dishwasher " ).
Pour in the detergent(see the section entitled, " Salt, Detergent and RinseAid").
Turn the knob located on the right of the control panel in the clockwise direction until the number or the symbol for the cycle
setting is aligned with the reference mark (see the section entitled, " Wash Cycle Table " ).
Press the ON/ OFF button, and the ON/OFF light will turn on. At this point, the wash cycle will begin.
2
3
4
5
6
1
1
1
1
1
1
4
7
8
1
1
1
6
2
2
2
2
2
2
2
2
5
5
5
5
5
5
5
5
3
3
3
6
4
4
4
4
4
4
4
3
3
3
3
3
When the washing cycle has finished,the buzzer of dishwasher will mooing eight second,then stop.Turn off the appliance using the
ON/OFF button,open the door of the dishwasher. Wait a few minutes before unloading the dishwasher to avoid handling the dishes
and utensils while they are still hot and more susceptible to breakage. Theywillalsodrybetter.
A forgotten dish can be added any time before the detergent cup opens.
Open the door a little to stop the washing.
After the spray arms stop working,you can open the door
completely.
Add forgotten dishes.
Close the door, the dishwasher will work after ten second.
4
3
2
1
Premise
: A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the detergent may
have already been released, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser
must berefilled (see the paragraph entitled " Loading the Detergent " ).
Open the door,Press the "Prog key-press" more than three second,then you can change the program to the desired cycle setting
(see the section entitled, " Starting a wash cycle. . . " ). Then, close the door.
It is dangerous to open the door when washing,because the hot water may be scaldedtoyou.
Program key-press
Programindicator light
7
Delay key-press
Press the key to set the start time.This dishwasher can be delayed to start for 1 to 24 hours,and the
display window beside the delay key can indicate the remaining time.If you want to cancel the delay start,
just press the key to make the remaining time become 0.
dely
