Produkte der Marke Beko

Rust, dscoloraton or surface deteroraton occurs on dshes

• Salt leakage exsts. >>> Salt may cause deterioration and oxidation on

metal surfaces. Pay attention not to spill salt around the salt filling hole

while adding salt. Make sure that the salt reservoir lid is tightly closed

after finishing the filling process. Run the prewash programme to remove

the salt that spilled inside the machine. Since the salt granules that will

remain under the lid will dissolve during prewash, causing the lid loosen,

check the lid once again at the end of the programme.

• Salty food remnants have remaned on dshes for a long tme. >>> If sil-

verware soiled with such foods will be kept waiting in machine, dirt must

be removed by prewash or dishes must be washed without being kept wa-

iting.

• Electrc nstallaton s not grounded. >>>Check if your machine is connec-

ted to the actual grounding line. Otherwise, the static electric created in

the product causes arcs on the surfaces of metal items creating pores,

removing the protective cover on the surface and causing discoloration.

• Intensve cleansers such as bleaches are used. >>> Protective cover on

metal surfaces gets damaged and looses its efficiency in time when it gets

in contact with cleansers such as bleach. Do not wash your dishes with

bleach.

• Metal tems partcularly such as knves are used for purposes other then

ther ntended uses. >>> Protective cover on the edges of knives may get

damaged when they are used for purposes such as opening cans. Do not

use metal kitchen utensils out of their intended uses.

• Slverware are made of low qualty stanless steel. >>> Corrosion on such

items is inevitable; they should not be washed in dishwashers.

• Ktchen utensls that are already corroded are washed n dshwasher. >>>

Rust on a corroded item can migrate to other stainless steel surfaces and

cause corrosion on those surfaces as well. Such items should not be was-

hed in dishwashers.