9 IMPORTANT: There should be a filter sitting inside the end of the
inlet hose that connects to your mains water supply. The inlet hose
may leak if this filter is missing. This filter is supplied with the
appliance, you should contact Baumatic to obtain one, if it is
missing.
9 Tighten the inlet hose to your mains supply fully, but do not over
tighten as this may distort the filter that sits in the end of the inlet
hose.
9 Test for any leaks.
IMPORTANT: Minimum mains water pressure required: 0.5 bar
Maximum mains water pressure allowed: 10 bar
Water outlet
9 Secure the drain hose, so that it cannot move whilst the washing
machine is in use.
9 Place the end of the drain hose on your drain pipe. Push it a
short way down into your drain pipe.
9 IMPORTANT: Do not insert the drain hose too deeply into the
water pipe, as this may cause siphoning.
9 NEVER EXTEND THE DRAINAGE HOSE FROM ITS ORIGINAL
LENGTH.
30
