Indicators
Salt indicator. It comes on when it is necessary to fill the salt container.
1)
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispenser.
1)
Multitab indicator. It comes on when you activate the function.
1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a
washing programme operates.
On/off button
Press this button to activate or deactivate the appliance.
After ten minutes from the end of the washing programme, the AUTO OFF function auto-
matically deactivates the appliance. This helps to decrease energy consumption.
Display
The display shows:
• The electronic adjustment of the level of the water softener
• The activation and deactivation of the rinse aid dispenser (only with the multitab func-
tion on)
• The time of the washing programme
• The remaining time to the end of the washing programme
• The end of a washing programme (the display shows a zero)
• The time of the delay start
• The alarm codes.
Delay start button
Press this button again and again to delay the start of the washing programme from 1 to
24 hours.
Multitab button
Press this button to activate or deactivate the multitab function. Refer to 'Multitab func-
tion'.
EXTRA SILENT programme button
Press this button to set the EXTRA SILENT washing programme.
This is the most silent washing programme. The pump works at a very low speed to de-
crease the level of noise. Because of the low speed, the programme time is long.
Set this washing programme in times when the power rate is more economical.
Programme buttons
Press one of these buttons again and again until the indicator of the washing programme
comes on. Refer to 'Washing programmes'.
Cancel button
Press this button to cancel a washing programme in operation. Refer to 'Setting and start-
ing a washing programme'.
Control panel
71
