SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL September 1997
2-9
500: System-Wide Counters ALARM PREMINDER CNTR 5
AUTO REDIAL COUNTER 5
DISA INTERCOM CNTR 5
DISA LOCK COUNTER 5
NEW CALL COUNTER 99
UCD VISUALALM COUNTER 0
UCD AUDIO ALM COUNTER 0
501: System Timers SEE TABLE OF TIMERS AND
VALUES
502: Forward no Answer Timer TIMER SET FOR 15 SECONDS
503: Trunk-Wide Timer SEE MMC 503
504: Pulse make/Break Ratio MAKE/BREAK = 33
PULSES PER SECOND = 10
505: Assign Data and time DATE OF SW GENERATED
506: Tone Cadence SEE MMC 506
507: Assign Auto Night Time START 0000
508: Call Cost END 0000
509: CO Tone Cadence SEE MMC 509
510: Message Wait LED Cadence NONE
600: Assign Operator Group RING MODE NONE
OVERFLOW TIME 000 SEC
GRP TRSF TIME 000 SEC
NEXT PORT NONE
GROUP MEMBER MEMBER 01:201
OTHER MEMBER NONE
601: Assign Station Group NONE
602: Station Group Name NONE
603: Assign Trunk Group ALL TRUNKS ARE IN GROUP 9
604: Assign Station to Page Zone NO STATIONS ASSIGNED
ALL ZONE IS SET
605: Assign External Page Zone NONE
606: Assign Speed Block SYSTEM: 200 ENTRIES
STATIONS: ONE BIN OF TEN ENTRIES
607: UCD Options 1ST MSG 61
2ND MSG 62
EXIT CODE NONE
RETRY CNT 03
FINAL DEST 500
AUTO LOGOUT 030SEC
UCD RECL TM 010SEC
MOH SOURCE NONE
608: Assign Review Block NO REVIEW BLOCKS ARE
ASSIGNED
700: Copy COS Contents NONE
701: Assign COS Contents ALL OPTIONS SET TO YES
702: Toll Deny Table ALL ENTRIES ARE SET TO 0
703: Toll Allowance Table ALL ENTRIES ARE SET TO 0
704: Assign Wild Character ALL ENTRIES ARE SET TO 0
705: Assign System Speed Dial NONE
706: System Speed Dial by Name NO NAMES
707: Authorization Code NONE
708: Account Code NONE
709: PBX Access Code NONE
710: LCR Digit Table SEE MMC 710 - DEFAULT DATA
711: LCR Time Table SEE MMC 711 - DEFAULT DATA
712: LCR Route Table NONE
713: LCR Modify Digit Table NONE
714: DID Number and Name Translation NO ENTRIES
