SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 110 KEYSET ON/OFF
DESCRIPTION:
Allows the system administrator to set any of the keyset features listed below.
0. AUTO HOLD Automatically places an existing C.O. call on hold if a CALL button,
trunk key or trunk route key is pressed during that call.
1. AUTO TIMER Automatically starts the stopwatch timer during a C.O. call.
2. HEADSET USE When on, this feature disables the hookswitch allowing a headset
user to answer all calls by pressing the ANS/RLS button.
3. HOT KEYPAD When on, this feature allows the user to dial directory numbers
without having to first lift the handset or press the SPK button.
4. KEY TONE Allows the user to hear a slight tone when pressing buttons on
his/her set.
5. PAGE REJOIN Allows the user to hear the latter part of page announcements if
his/her keyset becomes free during a page.
6. RING PREF. When off, requires the user to press the fast flashing button to
answer a ringing call after lifting the handset.
7. CALL COST. If enabled (ON), LCD shows real time call cost calculated based on
Metering Pulses arrived.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 110
Display shows
[201] STN ON/OFF
AUTO HOLD :OFF
2. Dial keyset number (e.g., 205)
OR
[205] STN ON/OFF
AUTO HOLD :OFF
Press UP or DOWN to select keyset and
press RIGHT soft key to move cursor
OR
Press ANS/RLS for ALL
[ALL] STN ON/OFF
AUTO HOLD :?
3. Dial option number from above list
(0–5, e.g., 3)
[205] STN ON/OFF
AUTO HOLD :OFF
