Dil ID: 1
Dil Adı: english
Dil Kodu: en3 Cyron-lighting Brand's Products
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



77777
4
Getting started
Battery installation
Install the battery as shown below.
Plug the battery connector securely
into the socket inside the handset
battery compartment, matching the
color-coded label.
1.
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
CR1232
Place the battery with the label
THIS SIDE UP facing up and the wires
inside the battery compartment.
2.
Align the cover at against the battery
compartment, then slide it towards
the center of the handset until it clicks
into place.
3.
Charge the handset by placing it in
the telephone base or charger.
4.
If the handset will not be used for a long time, disconnect and remove the battery
to prevent possible leakage.
To purchase replacement batteries, visit our website at www.vtechphones.com
or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial
1 (800) 267-7377.
IMPORTANT:
Check for a dial tone by pressing . If you hear a dial tone, the installation
is successful.
If you do not hear a dial tone:
Make sure the installation procedures described above are properly done.
It may be a wiring problem. If you have changed your telephone service to digital
service from a cable company or a VoIP service provider, the telephone line may
need to be rewired to allow all existing telephone jacks to work. Contact your
cable/VoIP service provider for more information.
CANCEL