4
Automatic Hold
Allows you to automatically place a call on hold
when pressing another line key, without pressing
HOLD
.
Button Inquiry
Allows you to view line or feature assignment
for each key on your Norstar telephone set by
pressing
FEATURE
*
0
followed by the key
you wish to view. The information is shown
on your telephone display. To exit your inquiry
session, press the
RLS
key.
Call Duration Timer
By pressing
FEATURE
7
7
, the duration
time of your current or last call is displayed for
approximately five seconds.
Class of Service (COS)
Determines the access privileges and dialing range
assigned to a telephone line and can help control abuse.
Contrast Adjustment
Allows you to set the contrast level of your
telephone display. To activate, press
FEATURE
*
7
and follow the display prompts, then press
the
softkey or
HOLD
to store your new setting.
Exclusive Hold
Prevents a held call from being retrieved from
another Norstar telephone set with the same
telephone number. To activate, press
FEATURE
,
then
HOLD
. To return to the held call, press
the line key and lift the handset.
Feature Time Out
If you have taken more than 15-seconds to
press a button in response to a display when
programming or using Norstar features, you will
hear a descending double alert tone notifying you
that you have been timed out of that function. In
this case, you need to start your activity again.
Key Service Unit (KSU)
A hardware component of the Norstar system that
is linked to the CTS telephone system. Provides a
point of connection for the various types of devices,
telephones, and expansion modules used in Norstar.
Controls the service area of Norstar features.
Pause
Allows you to insert a 1.5-second delay in a dialing
sequence when programming a number using a
memory key or speed dial list. Press
FEATURE
7
8
to insert a pause during programming.
Programmed Release
Used when programming a number onto a
memory key or speed dial list to end the call.
Press
FEATURE
*
8
9
to program release at
the end of a dialing sequence.
Ring Type
Offers four distinctive ring types to help
differentiate which office telephone set is ringing.
It changes the ring type for all lines appearing
on the telephone set and is not line specific. To
set a new ring type, press
FEATURE
*
6
and
follow the display prompts. Press the softkey
or
HOLD
to store your new settings.
Ring Volume
Activates the ringer to allow you to adjust the
ring level of your telephone set. Press
FEATURE
*
8
0
, then use the volume control rocker bar
to increase or decrease the ring volume. You can
also use the volume control rocker bar to adjust
the ring level while your telephone is ringing due
to an incoming call.
Run/Stop
Inserts a break point into a dialing sequence
of numbers or codes when programming the
Automatic Dial feature using a memory key. Once
programmed, the first press of the programmed
memory key dials the first sequence of numbers
or codes before the break point; the next press
of the memory key dials the second sequence
of numbers or codes. To insert Run/Stop, press
FEATURE
*
9
.
Time
Displays the current time and date for
approximately five seconds while you are on a call.
To activate, press
FEATURE
8
0
3
.
Telephone Administration
CTS Training Center
