ENGLISH
33
4. Select the required option(s)
5. Select the programme and start the
machine
Turn the programme selector dial clockwise to the
required programme and press the ON/OFF button: the
mains on light comes on and the machine starts to
operate.
6. At the end of the programme
The machine stops automatically.
If you have selected a programme which ends with the
water of the last rinse left in the tub (WOOL,
DELICATES, SYNTHETICS AND MIXED FABRICS),
drain the water before opening the door.
To drain only, select programme “R” (drain) in order to
drain and spin.
To drain and spin, select programmes “G” (spin) or “L”
(short spin).
Wait two minutes before opening the door to give the
electric locking mechanism time to release it.
Depress the ON/OFF button again to switch the
machine off. The mains on light goes out.
Remove the laundry.
Turn the drum by hand to make sure it is completely
empty, so as to avoid any forgotten items being
damaged in a subsequent wash (e.g. shrinking) or their
colour running into a load of whites.
Release any buttons which have been pressed.
Turn the water tap off and unplug the machine.
Leave the door ajar to air the machine.
MARCHA
PARADA
ECO-
AHORRO
800
650
Operating sequence
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 90°C, with the
machine empty, in order to remove any manufacturing
residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door. Place the laundry in the drum, one item
at a time, shaking them out as much as possible. Close
the door.
2. Measure out the detergent and the
additives
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment .
If you wish to carry out a programme with prewash, pour
detergent into the appropriate compartment marked
.
If required, pour fabric softener into the compartment
marked , and bleach into the compartment marked
without exceeding the «MAX» mark.
3. Select the temperature
Turn the dial to the required setting.
132984020.qxd 24/09/2005 11:43 Pagina 33
